XS-BIO is a biocompatibility-focused resin developed for micro-DLP printing of microfluidic devices, lab-on-a-chip components, and medical device prototypes. Its ultra-low 200 cps viscosity flows cleanly out of channels and cavities measured in tens of microns, minimizing trapped resin and simplifying post-processing on the geometries that define the field.
Mechanically, XS-BIO delivers 45 MPa tensile strength at Shore 80D with a 120°C heat deflection temperature, giving devices the rigidity and thermal headroom for thermocycling, bonding, and downstream lab workflows. Biocompatibility validation documentation for specific use cases is available on request — talk to us early about your regulatory pathway and we’ll support your qualification effort.
The light-yellow formulation cures to a tone that closely resembles molded ABS, making finished parts read as production components in design reviews and customer-facing prototypes.
XS-BIO puts micro-DLP resolution to work where it matters most: microfluidic and medical devices that need clean channels, stable mechanics, and a credible path to qualification.
| Property | Value |
|---|---|
| Tensile strength (MPa) | 45 |
| Elongation at break (%) | 8 |
| Bending strength (MPa) | 50 |
| Bending modulus (MPa) | 1450 |
| Heat distortion temp. @0.45 MPa (°C) | 120 |
| Heat distortion temp. @1.8 MPa (°C) | — |
| Dielectric constant @5 GHz | 3 |
| Dielectric loss tanδ @5 GHz | 3.53e-2 |
| Viscosity (cps) | 200 |
| Hardness (Shore) | 80D |
| Color | Light Yellow |
