XS-HD is a high-rigidity resin for parts where deflection is the enemy: 70 MPa tensile strength, a 3800 MPa bending modulus, and Shore 85D hardness make it the stiffest polymer in the XS lineup. It’s the choice for optical mounts and alignment features, micro-gears and mechanisms, metrology and inspection fixtures, and any component that must hold position under load.
At just 100 cps, XS-HD is also the lowest-viscosity resin in the range — it flows out of the smallest cavities and resolves the finest features the printer’s optics can project, making it a natural pairing with 2 µm and 10 µm platforms. Stable dielectric behavior at 5 GHz keeps it suitable for rigid electronic and RF components as well.
The black formulation delivers a clean, production-ready finish with high visual contrast for feature inspection, and its opacity sharpens fine-detail resolution by suppressing light scatter during exposure.
XS-HD is precision embodied: maximum stiffness and the lowest viscosity in the lineup, for micro parts that hold their geometry and their position.
| Property | Value |
|---|---|
| Tensile strength (MPa) | 70 |
| Elongation at break (%) | 3 |
| Bending strength (MPa) | 100 |
| Bending modulus (MPa) | 3800 |
| Heat distortion temp. @0.45 MPa (°C) | 80 |
| Heat distortion temp. @1.8 MPa (°C) | — |
| Dielectric constant @5 GHz | 3 |
| Dielectric loss tanδ @5 GHz | 3.53e-2 |
| Viscosity (cps) | 100 |
| Hardness (Shore) | 85D |
| Color | Black |
